Home › Subminiature-C › UHV Components
Testing Site Alert

This is a test of the "site alert message system".

Testing Site Alert

This is a test of the "site alert message system". 123

Subminiature-C Connectors

UHV PEEK Connector - 9C - Female

UHV PEEK Connector - 9C, Female

Part Number: 100150

9 pin, female subminiature-C PEEK connector.
(Contacts are not included and must be purchased separately)

$143.00
Male 9 Pin, Circular UHV PEEK Connector, Sub-C

UHV PEEK Connector - 9C, Male

Part Number: 100140

9 pin, Male Subminiature-C (Sub-C) UHV PEEK connector.
(Contacts are not included and must be purchased separately)

$143.00
UHV Macor Connector 9C, Female

UHV Macor Connector 9C, Female

Part Number: 112700

9-Pin female subminiature-C Macor® (glass-ceramic) connector.
(Contacts are not included and must be purchased separately)

$406.00
UHV Macor Connector, 9C, Male

UHV Macor Connector, 9C, Male

Part Number: 112701

9-Pin male subminiature-C Macor® (glass-ceramic) connector.
(Contacts are not included and must be purchased separately)

$406.00
Contacts, Type-T1 Standard / Female

Contacts, Female 20~24 AWG T1

Part Number: 100180
.040 Diameter female socket, gold-plated contacts / Wire-well accepts 20~24 AWG wire size /10-Pack

 

$30.00
Contacts, Type-T1 High Duty Cycle / Female

Contacts, Type-T1 High Duty Cycle - Female

Part Number: 110908

110908 — 20-24 AWG wire diameter, female contacts with stainless steel sleeve
110909 — 26-30 AWG wire diameter, female contacts with stainless steel sleeve (see 'option' on detail page)


10 per package — High duty connect/disconnect cycles (3+ cycles per day)

$44.00
Contacts, Type-T1 Standard - Female (25 Pack)

Contacts, Type-T1 Standard - Female (25 Pack)

Part Number: 111500

.040 Diameter female socket, gold-plated contacts / Wire-well accepts 20~24 AWG wire size / 25-Pack

 
$75.00
Contacts, Type-T1 Standard - Male

Contacts, Male 20~24 AWG T1

Part Number: 100170
.040 Diameter male pin, gold-plated contacts / Wire-well accepts 20~24 AWG wire size /10-Pack
$30.00
Crimp Tool / TYPE-T1 Contacts

Crimp Tool - TYPE-T1 Contacts

Part Number: 100190
Crimping tool for use with Standard and (sleeved) High Duty Cycle Male and Female contacts.

See product details for complete list of contacts compatible with this tool.

$950.00
Wire Stripper - 26-36 AWG

Wire Stripper- 26-36 AWG

Part Number: 100191

0.12-0.40mm, 26-36AWG wire stripper. Great for use with KAPTON insulated wire.

$154.00
Wire Stripper - 20-30 AWG

Wire Stripper- 20-30 AWG

Part Number: 100192

0.25-0.80mm, 20-30 AWG Wire Stripper. Great for use with KAPTON insulated wire.

$154.00
Screwdriver Set, Connector

Screwdriver Set - Connector

Part Number: 112146

This screwdriver set is ideally suited for all your connector needs.

$39.00
Contacts, Type-T1, Male 20-24AWG

Contacts, Male 20~24 AWG T1 (25 Pack)

Part Number: 111502

.040 Diameter male pin, gold-plated contacts / Wire-well accepts 20~24 AWG wire size /25-Pack

$75.00
PEEK & Macor Connectors - Subminiature-C (Sub-C), drawing

PEEK and Macor Sub-C Connectors

UHV Sub C Connectors are available in either a PEEK (polyetheretherketone) polymer or Macor ceramic material, and both use the contacts listed below.   Female connectors mate directly to vacuum and/or air-side of male Subminiature-C UHV feedthroughs or HV feedthroughs.
 

Caution: Note that cable leads must be threaded through connector back-piece before crimping contacts, as crimped contacts will not fit through back-piece holes.

PEEK Connectors Specifications:

  • Material: Polyetheretherketone Polymer
  • Sub-C 9-pin interface
  • High temperature rated to 250°C
  • Voltage rating: 500 VDC max.
  • 5 AMPs per pin (20% of pins at any given time)
  • UHV rated 1x10-10 Torr

MACOR Connector Specifications:

  • Material: Macor Ceramic
  • Sub-C 9-pin interface
  • High temperature rated to 400°C
  • Voltage rating: 500 VDC max.
  • 5 AMPs per pin (20% of pins at any given time)
  • UHV rated 1x10-10 Torr

Standard Contacts are made of a gold plated Copper alloy, and are recommended for use in both PEEK or Macor ceramic subminiature-C (sub-C) and subminiature-D connectors.

High Duty Cycle Contacts are "standard contacts" that have been reinforced with a stainless steel sleeve, which extends the contact's spring life. They're used in place of our standard contacts in applications requiring frequent and/or excessive plug/unplug cycles (3 or more cycles per day).

Tools for installation of the contacts are also listed below.

pdf iconCatalog Page