Connector, Female - Air-Service
Part Number: 100160
Nine (9) pin, Delrin polymer female subminiature-C connector for air-service.
$101.00
Testing Site Alert
This is a test of the "site alert message system".
Testing Site Alert
This is a test of the "site alert message system". 123
Subminiature-C Air Connectors
Connector, Male - Air-Service
Part Number: 100162
Nine (9) pin, Delrin polymer male subminiature-C connector for air-service.
$101.00
Strain Relief, Connector - Air-Service
Part Number: 100161
Wire strain relief for use with male / female 9-pin Subminiature-C connectors
$40.00
Connector to Cable - Female / Air-Service
Part Number: 100020
Nine (9) lead circular air-service cable assembly includes Delrin polymer subminiature-C female connector on one end. Available in 48" or 96" inch lengths.
$136.00
Contacts, Female 20~24 AWG T1
Part Number: 100180
.040 Diameter female socket, gold-plated contacts / Wire-well accepts 20~24 AWG wire size /10-Pack
$30.00
Contacts, Type-T1 High Duty Cycle - Female
Part Number: 110908
110908 — 20-24 AWG wire diameter, female contacts with stainless steel sleeve
110909 — 26-30 AWG wire diameter, female contacts with stainless steel sleeve (see 'option' on detail page)
10 per package — High duty connect/disconnect cycles (3+ cycles per day)
$44.00
Contacts, Male 20~24 AWG T1
Part Number: 100170
.040 Diameter male pin, gold-plated contacts / Wire-well accepts 20~24 AWG wire size /10-Pack
$30.00
Crimp Tool - TYPE-T1 Contacts
Part Number: 100190
Crimping tool for use with Standard and (sleeved) High Duty Cycle Male and Female contacts.
See product details for complete list of contacts compatible with this tool.
$950.00
Crimp Tool Positioner - TYPE-T2 Contacts
Part Number: 111315
This Crimp Tool Positioner converts the DCT-1 to a DCT-2 crimp tool.
$143.00
Wire Stripper- 26-36 AWG
Part Number: 100191
0.12-0.40mm, 26-36AWG wire stripper. Great for use with KAPTON insulated wire.
$154.00
Wire Stripper- 20-30 AWG
Part Number: 100192
0.25-0.80mm, 20-30 AWG Wire Stripper. Great for use with KAPTON insulated wire.
$154.00
Cable, Bulk - Air Service
Part Number: 100022
Nine (9) lead 24AWG circular cable, 15' foot length, for air-service applications.
$38.00
Screwdriver Set - Connector
Part Number: 112146
This screwdriver set is ideally suited for all your connector needs.
$39.00
Contacts, Male 20~24 AWG T1 (25 Pack)
Part Number: 111502
.040 Diameter male pin, gold-plated contacts / Wire-well accepts 20~24 AWG wire size /25-Pack
$75.00
Sub-C Air Cables and Connectors
Connector to Cable assemblies are fitted with a Delrin® polymer 9-pin Sub-C female connector on one end, and non-terminated nine (9) PVC insulated wires / cables at the other. The 9-pin female connector mates directly to the air-side of our subminiature-C feedthroughs.
Air Service Connectors are made from a Delrin® polymer material and use either of the contacts listed below. Caution: Wires must be threaded through the connector back-piece before crimping contacts. Crimped contacts WILL NOT fit through back-piece holes.
Standard Contacts are made from a copper alloy and gold plated. They're recommended for use in our subminiature-C and subminiature-D vacuum and air-service connector products.
High Duty Cycle Contacts are standard contacts that have been reinforced with a stainless steel sleeve, which extends the contact's spring life. They're used in place of our standard contacts in applications requiring frequent and/or excessive plug/unplug cycles (3 or more cycles per day).
