Torr Seal Epoxy / Sealant - Agilent
Part Number: 110516
Torr Seal Vacuum epoxy/sealant.
1.2 oz. Hardener and 2.8 oz. Resin
$103.00
Testing Site Alert
This is a test of the "site alert message system".
Testing Site Alert
This is a test of the "site alert message system". 123
Adhesive Systems & Vacuum Sealants
Torr-Seal Epoxy Mixing System
Part Number: 113257
Torr-Seal Epoxy Mixing System. Applcicator gun, Torr-Seal 2 oz., and three (3) mixer tips.
$325.00
Epoxy-Patch - Torr-Seal Equivalent
Part Number: 110515
Vacuum Sealant - Epoxy Patch, Direct Equivalent to Torr Seal 1.2 oz. Hardener and 2.8 oz. Resin.
Rated for In-Vacuum use from -45ºC to 120ºC and 1x10-9 Torr.
$72.00
Vacseal - 1/2 oz. Bottle.
Part Number: 110517
Vacuum Sealant - Vacseal - 1/2 oz. bottle with applicator brush.
$124.00
UHV Conductive Epoxy - 225ºC
Part Number: 113255
UHV Conductive Glue/Epoxy - Epotek H21D - 1oz.
Vacuum rated to 1x10-10 Torr with a operating temperature to 225ºC.
$316.00
UHV Conductive Silver-Filled Epoxy - 225ºC
Part Number: 113256
UHV Conductive Glue/Epoxy - Epo-Tek H27D High Temperature Rated - 1oz. of both Part-A and Part-B.
Vacuum rated to 1x10-10 Torr with a maximum operating temperature of 225ºC (325ºC Intermittent).
$331.00
UHV Epoxy / Glue - 250ºC
Part Number: 111785
High temperature UHV compatible epoxy.
Great for sealing in SMA 905 Fiber Optic connectors as well as many other vacuum components.
$26.00
Vacuum Compatible Adhesive Sealants
AGP adhesive sealants and vacuum epoxy provide a quick, permanent vacuum seal with low outgassing, suitable for use in high vacuum applications.
UHV Epoxy / Glue is great for sealing Fiber Optic SMA 905 connectors onto the Fiber. There are many other uses for this product.
Torr-Seal / Sealant Great for sealing small leaks on Ultra High Vacuum (UHV) and High Vacuum environments.
Vacseal is suitable for use in ultrahigh vacuum systems with pressures to 1 x 10-12 Torr. It has less in-vacuum weight loss than epoxy compounds and can withstand repeated temperature cycling from -200°C to 450°C. Available in both liquid and aerosol.
Conductive Epoxy / Glue are available in two different types. One is to 150ºC and the other one 270ºC. These two are ideally suited for fine instrumentation wire and cable.
