Type-C Thermocouple Pair - 0.010"
Part Number: 112101
Type-C, Matched W-5Re(+) / W-26Re(-) bare thermocouple wire, 0.010" OD, 30 AWG, 1 inch long.
$16.00
Testing Site Alert
This is a test of the "site alert message system".
Testing Site Alert
This is a test of the "site alert message system". 123
Bare Thermocouple Wires
Type-C Thermocouple Pair - 0.020"
Part Number: 112102
Type-C, Matched W-5Re(+) / W-26Re(-), bare thermocouple wire, 0.020" OD, 24 AWG, 1 inch long.
$31.00
Type-E Thermocouple Pair - 0.010"
Part Number: 112105
Type-E (Chromel®+ / Constantan-), bare thermocouple wire, 0.010" OD, 30 AWG, 1 foot long.
$6.00
Type-E Thermocouple Pair - 0.020"
Part Number: 112106
Type-E (Chromel®+ / Constantan-), bare thermocouple wire, 0.020" OD, 24 AWG, 1 foot long.
$6.00
Type-E Thermocouple Pair - 0.032"
Part Number: 112107
Type-E (Chromel®+ / Constantan-), bare thermocouple wire, 0.032" OD, 20 AWG, 1 foot long.
$6.00
Type-J Thermocouple Pair - 0.010"
Part Number: 112109
Type-J (Iron+ / Constantan-), bare thermocouple wire, 0.010" OD, 30 AWG, 1 foot long.
$6.00
Type-J Thermocouple Pair - 0.020"
Part Number: 112110
Type-J (Iron+ / Constantan-), bare thermocouple wire, 0.020" OD, 24 AWG, 1 foot long.
$6.00
Type-J Thermocouple Pair - 0.032"
Part Number: 112111
Type-J (Iron+ / Constantan-), bare thermocouple wire, 0.032" OD, 20 AWG, 1 foot long.
$6.00
Type-K Thermocouple Pair - 0.010"
Part Number: 112113
Type-K (Chromel®+ / Alumel®-), bare thermocouple wire, 0.010" OD, 30 AWG, 1 foot long.
$6.00
Type-K Thermocouple Pair - 0.020"
Part Number: 112114
Type-K (Chromel®+ / Alumel®-), bare thermocouple wire, 0.020" OD, 24 AWG, 1 foot long.
$6.00
Type-K Thermocouple Pair - 0.032"
Part Number: 112115
Type-K (Chromel®+ / Alumel®-), bare thermocouple wire, 0.032" OD, 20 AWG, 1 foot long.
$6.00
Type-R Thermocouple Pair - 0.010"
Part Number: 112117
Type-R (Copper+ / Alloy 11-), bare thermocouple wire, 0.010" OD, 30 AWG, 1 inch long.
$32.00
Type-S Thermocouple Pair - 0.010"
Part Number: 112118
Type-S (Copper+ / Alloy 11-), bare thermocouple wire, 0.010" OD, 30 AWG, 1 inch long.
$32.00
Type-T Thermocouple Pair - 0.010"
Part Number: 112121
Type-T (Copper+ / Constantan-), bare thermocouple wire, 0.010" OD, 30 AWG, 1 foot long.
$6.00
Type-T Thermocouple Pair - 0.020"
Part Number: 112122
Type-T (Copper+ / Constantan-), bare thermocouple wire, 0.020" OD, 24 AWG, 1 foot long.
$6.00
Type-T Thermocouple Pair - 0.032"
Part Number: 112123
Type-T (Copper+ / Constantan-), bare thermocouple wire, 0.032" OD, 20 AWG, 1 foot long.
$6.00
Ceramic Insulator 2 Hole design - 0.020" ID
Part Number: 112292
Bare wire ceramic insulator with a two hole design to insulate two bare conductors at a time. Made from ceramic Steatite, 0.020 ID 24AWG nominal, 1" long.
12 per package (1 foot).
12 per package (1 foot).
$27.00
Solid Core Bare Thermocouple Wire Pairs
Bare Thermocouple Wire is supplied as a PAIR with both the positive and negative non-insulated wire for the thermocouple type listed. These are non-terminated on each end (no weld or "Hot Junction"). However, Accu-Glass Products does offer this service.
All bare wire thermocouples in the list below is match Thermocouple wire and is NOT EXTENSION GRADE WIRE, therefore it is sold in short 1 foot or 1 inch lengths. This thermocouple wire CAN be used with our "standard" subminiature-D feedthroughs. Most applications will not register the small amount of error introduced by using non-thermocouple alloy pins in the feedthroughs. The error that is introduced is below acceptable limits for thermocouples and can be taken into account during calibration.
