This is a test of the "site alert message system".
This is a test of the "site alert message system". 123
2 Thermocouple Pair (Type-K) and 2 Power (12 AWG) Kapton Insulated Cables with Chromel and Alumel Sockets (Female), 2 Power Sockets, and a PEEK Sub-D Type Connector on one end.
19" or 39" lengths.
2 Thermocouple Pair (Type-K) and 2 Power (12 AWG) Kapton Insulated Cables with Chromel and Alumel Pins (Male), 2 Power Pins, and a PEEK Sub-D Type Connector on one end.
19" or 39" lengths.
1 Power Kapton Insulated Stranded Wire with Sockets (Female) on one end.
19" or 39" length.
Connector to Cable UHV assemblies are fitted with PEEK subminiature-D female or male connectors with Chromel®, Alumel® (Type-K), or Power contacts at one end and non-terminated, Kapton insulated cable at the other. The female cable connectors mate directly onto the vacuum-side of subminiature-D feedthroughs, or with male in-vacuum cable connectors.
Contact to Cable UHV cable assemblies include male or female contacts on one end and non-terminated, Kapton® insulated cable at the other. Special Note: They do not include PEEK connectors. Contact fitted thermocouple leads must be threaded through the connector back-piece before crimping contacts.
Thermocouples in this section are TYPE-K.