This is a test of the "site alert message system".
This is a test of the "site alert message system". 123
1 Kapton Coaxial Cable (26AWG, 50 Ohm) + 4 Single Way Kapton Cables with Sockets (Female) & a Peek D-Type Connector on one end and "Connector #2" option on the other.
19" or 39" lengths.
1 Kapton Coaxial Cable + 4 Single Way Kapton Cables with Pins (Male) & a Peek D-Type Connector on one end and "Connector #2" option on the other.
19" or 39" lengths.
3 Kapton Coaxial Cables & a PEEK D-Type (female) Connector on one end and "Connector #2" option on the other.
19" or 39" lengths.
3 Kapton Coaxial Cables & a PEEK D-Type (male) Connector on one end and "Connector #2" option on the other.
19" or 39" lengths.
5 Kapton Coaxial Cables & a PEEK D-Type (female) Connector on one end and "Connector #2" option on the other.
19" or 39" lengths.
5 Kapton Coaxial Cables & a PEEK D-Type (male) Connector on one end and "Connector #2" option on the other.
19" or 39" lengths.
Single Way Coaxial Kapton Cable with Coaxial (Female) Lead on one end.
19" or 39" lengths.
Single Way Coaxial Kapton Cable with Coaxial (Male) Lead on one end.
19" or 39" lengths.
Single Way Kapton Cable with Socket (Female) on one end.
19" or 39" lengths.
Accu-Glass Products, Inc. offers a large series Coax-D cable assemblies.
Connector to Cable assemblies are constructed with UHV compatible PEEK subminiature-D connectors and Kapton® insulated 50-ohm coaxial cables. The single coaxial connector assembly also includes four Kapton® insulated non-terminated instrumentation wires with either 19" or 39" lengths. The female cable connectors mate directly onto the vacuum-side of Coaxial subminiature-D feedthroughs, or with male in-vacuum cable connectors.
User-Specified End Options are available for the "Connector to Cable" assemblies, the options include: SMA male or female, BNC male, or User-End female. These options can be found by clicking on any "Connector to Cable" assembly below.
Contact to Cable leads are single instrumentation, or 50-ohm coaxial, Kapton® insulated wires terminated on one end with gold plated female sockets that mate with corresponding feedthroughs. Opposite ends have no termination. They are ideally suited for applications where subminiature-D connectors are not required, or desired.